KLEIBERIT products with the Emicode® seal

Which seal classes are distinguished?

EC2_(GB)_green_ — Base class. Products meet the basic requirements for obtaining the EMICODE® label and are low in emission.

Elevated class. Products with this seal meet the highest environmental and health standards.

Premium class. Limit values are again significantly lower than EC1. It sets the limit of what is technically feasible.

Product	Emicode^®	Base	Use
404.2	EC 1^PLUS	PVAC dispersion	Bonding HPL coverings to chipboard and calcium sulphate panels, adhesive with conductive properties
404.3	EC 1^PLUS	EVA dispersion	Bonding resilient floor coverings to wood-based panels, colored grey
404.4	EC 1^PLUS	EVA dispersion	Bonding resilient floor coverings to calcium sulphate tiles, colored grey
404.8	EC 1^PLUS	EVA dispersion	Bonding of carpets and plastic floor coverings, colored grey
405.5	EC 1^PLUS	Synthetic resin dispersion	Bonding chipboards and plaster boards (raised floors) A+ after French VOC-Standard
473.0	EC 1^PLUS	Acrylate dispersion	Primer for mounting foams, also suited for binding dust of concrete floors
535.0	EC 1^PLUS	2C-PUR Foam	Installation of door frames, insulation of windows, dual cartridge A+ after French VOC standard
540.5	EC 1^PLUS	1C-PUR Foam	For insulation as well as for filling wall breakthroughs and hollow spaces, no foam gun needed
544.3	EC 1^PLUS	1C-PUR Foam	For insulation, very high yield, processing with foam gun
544.4	EC 1^PLUS	1C-PUR Foam	For insulation, can be precisely dosed with foam gun, no hardening during work breaks
588.4	EC 1^PLUS	2C-PUR Foam	Assembly of door frames, metal and wood, no foam gun needed
583.5	EC 1^PLUS	1C-STP Adhesive	Parquet adhesive, elastic, absorbs footstep noise A+ after French VOC-Standard
596.1/596.2	EC 1	2C-PUR Adhesive	Adhesive for high-strength bonding of metal, plastics and wooden material, also suitable for carpet bonding
596.3 + 870.0	EC 1^PLUS	2C-PUR Adhesive	Adhesive for high-strength bonding of metal, plastics and wooden material, also suitable for carpet bonding
601.1	EC 1^PLUS	1C-STP Adhesive	For indoor and outdoor use, high green strength, suitable for mirror bonding acc. DIN EN 1036 A+ after French VOC-Standard
601.2	EC 1^PLUS	1C-STP Adhesive	For indoor and outdoor use, hard-elastic, suitable for mirror bonding acc. DIN EN 1036 A+ after French VOC-Standard

Breathe easily with EMICODE®

In order to be awarded the EMICODE® label, manufacturers need to submit their products for extensive testing at renowned institutes. Based on scientific test results, products are classified into different emission classes. Only products complying with the most stringent emission limits are awarded the EMICODE® label. The label offers consumers, craftsmen and architects guidance to decide which materials offer maximum assurance of indoor air quality and guarantees optimum health protection and a high level of environmental compatibility.