Adhesives for manufacturing and assembly of raised floors

Raised floors can be made from a range of different materials such as particle boards, mineral materials, aluminium, steel plates, plastics, carpets, etc. These are joined together to produce the final product and later installed with the aid of metal supports. A variety of adhesives are used during manufacturing and installation.

Manufacturing

KLEIBERIT’s portfolio includes many products tailored to the different needs in raised floor manufacturing and installation. Dispersion adhesives, two-component systems, reactive and thermoplastic hotmelts all provide high-strength and reliable bonding.

Edge banding in manufacturing raised floor boards

Edge banding protects the open raised floor board. Special edging materials are used to dissipate any electrostatic discharge that may occur. Laminate edges, polyester edges, resined paper edges, and PVC edges are examples of typical edge banding materials. We recommend using EVA hotmelts for efficient production processes. Depending on the combination of materials used, pre-treating with a primer can lead to improved bonding results. EVA dispersions can also be used for edging raised floor boards.

Find the right adhesive for your application.

Take a look at our product table and let our experts advise you.

Adhesives for fitting raised floors

Raised floor boards can be laminated with specific materials, either for aesthetic reasons or to meet the usage requirements. Raised floors must be electrically conductive, washable, waterproof, and suitable for use with wheelchairs. Textile surfaces – whether non-woven or carpet surfaces with or without latex or synthetic backings – all need to be glued or bonded in some way. Finding the right adhesive depends on the materials used and the manufacturing process.

Take a look at our product table and let our experts advise you.

Gluing the moisture barrier in raised floor manufacturing

A moisture barrier is applied to the whole underside of the raised floor in order to prevent any moisture seeping into the board from below. This ensures a stable and even surface over the long-term without changes to the properties. The adhesive has to be permanently resistant to heat sources and moisture seeping in to the glued joints. Reactive hotmelts are increasingly becoming the product of choice for such purposes.

Take a look at our product table and let our experts advise you.

 

 

 

Assembly

A range of different adhesives are used for installing raised floors. Glues are used to lock threads and fix supports, and special dispersons are used to carry out sealing work on screed.

Thread locking with 1C adhesives

Raised floor boards are installed on a structure of frames and supports, with threaded rods being used to adjust the height of the supports. Over time, the height of the threaded rod can change due to constant pressure being applied to the floor, leading to unevenness. To prevent this, thread locking adhesives are used to connect the threaded rod to its position so that it stays in place and the height remains the same.

Take a look at our product table and let our experts advise you.

Gluing supports with 1C adhesives

Raised floor supports are glued to the subfloor to prevent them from moving during the course of use. We recommend using two-component PUR adhesives for this purpose: they can be configured to the user’s exact needs, and are fast and easy to mix in the required amounts on site.

Take a look at our product table and let our experts advise you.

Sealing the subfloor with an acrylate dispersion

A sealant can be applied to improve the subfloor and also to bind dust particles. This additionally creates an ideal basis for bonding the supports. The sealant is applied in a thin layer and waterproofs the surface of the foundation. It does not, however, even out any irregularities in the floor.

Any questions? Take a look at our product table and let our experts advise you.

Products

Adhesives for flat lamination of raised floors

Product

Base

Certificate

Adhesive properties

Applications

non-conductive conductive

404.6

VA/E copolymer

IMO certified

 

Bonding of carpets and plastic coverings, dyed black

404.8

VA/E copolymer

GEV-Emicode EC1 plus

 

Bonding of carpets and plastic coverings, dyed grey

405.3

synthetic resin dispersion

 

 

Bonding galvanized steel sheets and aluminium foil moisture barriers

405.5  

synthetic resin dispersion

GEV-Emicode EC1 plus

 

Bonding of galvanized steel sheets

466.0

VA/E copolymer

 

 

Bonding of plastic coverings and aluminum foil moisture barriers

596.1/.2

2C PUR

GEV-Emicode EC1 plus

 

Bonding of carpets / plastic coverings and galvanized steel sheets

596.6/.7

2C PUR

GEV-Emicode EC1 plus

 

Bonding of plastic coverings and galvanized steel sheets

Adhesives for edgebanding of raised floors

Product

Base

Adhesive suitable for …

Applications

non-conductive,
gypsum fibre board
non-conductive
chipboard
conductive
chipboard

707.6

PUR HM

 

 

Bonding of plastic and paper edges

728.7

PSA

 

 

Bonding of plastic and paper edges

771.2

EVA copolymers

 

 

Conductive product for bonding of plastic and paper edges

777.0/.2/.4

EVA copolymers

 

 

Bonding of plastic and paper edges

779.7

EVA copolymers

 

 

Bonding of plastic and paper edges

788.3

EVA copolymers

 

Bonding of plastic and paper edges

Primer for edgebanding of raised floors

Product

Base

 Primer suitable for …

Applications

non-conductive,
gypsum fibre board
non-conductive
chipboard
conductive
chipboard

555.6

1C PUR

Edge improvement of chipboard and gypsum fibre board

837.0

artificial resin/solvent

Edge improvement of chipboard and gypsum fibre board

Product for on-site assembly of raised floors

Product

Base

Certificate

Applications

473.0

acrylate dispersion

GEV-Emicode EC1 plus

Floor primer for dust binding

504.0

1C PUR

 

Thread lock on the supports

539.5

2C PUR

 

Pedestal adhesive for clean rooms

566.0

1C PUR

 

Pedestal adhesive (general, not for clean rooms)

Brochure

Service

Personal Contact

fotolegende

©thodonal - stock.adobe.com


Connect with a contact person for your individual request!

Contact Form

fotolegende

©Jakub Krechowicz - stock.adobe.com


Use our contact form! Your personal contact will get back to you shortly.

KLEIBERIT Locations

fotolegende

©ipopba - stock.adobe.com


Contact one of our global offices!

Distributors

fotolegende

zaha.treecha17@gmail.com


KLEIBERIT has a global presence with a worldwide distributor network. Contact a distributor near you!